EUTECH INSTRUMENTS ALPHA COND 500 - REV 3 Manual do Utilizador descarregar pdf (Página 9)

A L P H A T E C H N I C S P R E C I S I O N T E M P E R AT U R E

4 6 0 0 S E R I E S T H E R M O M E T E R

A L P H A T E C H N I C S P R E C I S I O N T E M P E R AT U R E

4 6 0 0 S E R I E S T H E R M O M E T E R

- S P E C I F I C A T I O N S -

MODEL 4600-2 SPECIFICATIONS:

THERMISTOR: 10k Ohms @25°C used in

Alpha Technics’ Series 2400 probe housings.

PROBE CONNECTION: 1/4” phone jack,

permanently attached, or custom

MEASUREMENT RANGE:

-40.00°C to +150.00°C

(40.00°F to +299.98.00°F)

RESOLUTION:

0.01°C (0.01°F) from -40 to 102°C

(-40 to 215°F)

0.02°C (0.05°F) from 102 to 150°C

(215 to 299.98°F)

REPEATABILITY:

0.002°C to 0.01°C at -20 to 70°C

(0.004 to 0.02°F) at (-4 to 158°F)

typical for one week at constant

ambient temperature

SYSTEM ACCURACY: (probe + thermometer)

When used in combination with a 0.1°C probe,

the thermometer/probe system will have an

overall system accuracy of ±0.13°C or better

when the temperature to be measured is

between 0°C and +70°C.

High system accuracy over a range of 0°C

to 100°C is available by multiple point

temperature calibration. Accuracy equaling

that of the meter itself, at those temperatures,

are possible.

- O P E R A T I N G I N S T R U C T I O N S -

5. KEY PAD OPERATION:

When the MODE key is pressed, the active

function icon ﬂashes and the other function

icons turn on solid. Pressing MODE again

scrolls the display to the next function. When

the desired function icon is ﬂashing, pressing

F1 or F2 assigns that function to the selected

key and enters the thermometer into that

selected function mode.

If a function has not been selected, the MODE

operation will automatically end after four

ﬂashes of the display (about 4 secs.) or if

MODE is scrolled past C/F or CHK CAL*.

*Some versions do not have the CHK CAL function.

Model 4600 Manual-3.5x8.5-rev.indd, Spread 9 of 16 - Pages (24, 9) 1/11/2007 2:03 PM

Model 4600 Manual-3.5x8-imposed.9 9 8/13/2008 11:19:39 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

EUTECH INSTRUMENTS ALPHA COND 500 - REV 3 Manual do Utilizador Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo EUTECH INSTRUMENTS ALPHA COND 500 - REV 3